Service
Gutter Replacement Services
Worn-out gutters taken down and replaced with a system sized for the roof, with the fascia checked first.
- Licensed & insured contractors
- Free estimate, no obligation
- Nationwide coverage
- Same-day storm callouts
Call Now for a Free Estimate · Free estimates · No obligation
Free estimate over the phone
Talk to a gutter contractor now
One number, nationwide · No obligation
- Licensed, insured local contractors
- Free estimates, no obligation
- Same-day callouts for storm damage
- One call covers your whole area
What to have ready when you call
- Your address or ZIP code
- Roughly what is happening — overflowing, leaking, sagging, blocked
- Single or two story, and how long it has been going on
- A photo on your phone if you have one
The problem
Gutters rarely fail all at once. A joint starts to drip, then another, a run sags a little more each winter, and the patch-ups get closer together. At some point the money going into repairs would have paid for a new system, and the water that got past the old one has already started on the fascia, the siding and the ground along the foundation. Replacement is the point where you stop chasing individual leaks and fix the system as a whole.
Before you book
Rain gutter replacement or repair: making the call
The question to ask is not whether the gutters can be repaired, because almost anything can be patched, but whether repair is still good value. A useful rule of thumb: if the repairs needed this year would cost more than about a third of a full replacement, or you have paid for repairs on the same runs two years running, replacement is usually the cheaper path over the next decade.
Look at the condition of the metal itself. Aluminum that is dented, kinked or bowed between hangers can be rehung but rarely looks straight again. Galvanized steel that shows rust spots on the inside of the trough is rusting through from the inside, where water sits. Vinyl that has gone chalky and brittle cracks when it is flexed. Joints matter too: a sectional system leaking at many of its connectors will keep leaking, because each new sealant joint has the same short life as the last.
Size is the third test. If the gutters overflow along their whole length in heavy rain even when clean and correctly pitched, the system is undersized for the roof. No repair fixes that; only a wider gutter, larger downspouts or more outlets will.
Replacing one side or the whole house
Gutters on different sides of a house wear at different rates. The north side may stay damp and grow moss, the side under the trees clogs and sags, and the sunny side fades. Replacing only the worst elevation is a reasonable choice if the rest are sound, though new and old sections may not match in color, and joining a new seamless run to an old sectional one creates a joint that needs care. Ask the contractor whether a partial replacement will look and drain properly before deciding.
Upgrades worth making during a replacement
Replacement is the cheapest time to correct the old system's mistakes. Common upgrades include moving from 5-inch to 6-inch gutters on large or steep roofs, switching from 2x3-inch to 3x4-inch downspouts, adding an outlet on long runs, replacing spikes and ferrules with hidden hangers at closer spacing, and fitting a drip edge where there was none. If you are considering gutter guards, fitting them at the same time saves a second visit.
Gutter removal, fascia and the hidden part of the job
The old gutter has to come off before anyone can see the wood behind it, so a replacement quote often includes an allowance or a per-foot price for fascia repair rather than a fixed figure. That is normal and honest; a quote that promises no fascia work before the gutter is off is guessing. What you should expect is to be shown any soft wood and given a price before it is replaced.
Removal also means disposal. Old aluminum, steel and copper are scrap metal and are usually recycled. Vinyl generally goes to landfill. Haul-away should appear in the quote, not as a surprise on the invoice.
Roof and gutter replacement together
When a storm damages both the roof and the gutters, an insurance claim may cover both, and the work is often done by a roofing contractor who subcontracts or self-performs the gutter part. Ask who is installing the gutters, what size and gauge they are, and whether the gutter work carries its own warranty. Roof restoration jobs, such as coating a metal or flat roof, also commonly include new gutters, because the old ones are removed for access.
Siding and gutter replacement
Re-siding a house is another natural point to replace gutters. New siding is usually installed with the gutters off, and the trim, fascia and gutter colors can be chosen together. Make sure the siding contractor and the gutter installer agree on the order: fascia and drip edge first, then siding, then gutters, so the gutter hangers fasten into solid wood rather than through new siding panels.
Replacing built-in and concrete gutters
Older homes and some commercial buildings have gutters built into the roof edge or the cornice, lined with metal or formed in concrete. Replacing them is a bigger project than a standard gutter swap: some owners reline the built-in gutter to keep the original look, while others close it off and fit external gutters instead. The right choice depends on the building's age, any historic district rules and the condition of the structure around the old gutter.
Choosing among gutter replacement companies
Gutter replacement companies include gutter specialists, roofing companies and exterior remodelers. The best gutter replacement company for most homes is one that forms seamless gutters on site, checks the fascia before quoting, and hauls away the old system. When comparing rain gutter replacement companies, ask for the same scope in writing from each so the prices line up.
Local gutter replacement companies in your area know the local weather, so they can size the gutters and downspouts for your rainfall and snow. The companies that replace gutters through our network also handle gutter and eaves replacement together when the fascia and soffit are worn.
Repair, cleaning or replacement?
Gutter repair vs replacement comes down to how much of the system is failing. A blocked gutter needs gutter blockage removal, not new gutters. A few leaking joints or one sagging run need repair. Replacement makes sense when rust, many leaks, wrong size or rotten fascia affect most of the house.
Read before you call
Costs, materials and guides for gutter replacement
- Gutter Installation Cost: What New Gutters Really Cost
- Gutter Cost by House Size: 1,000 to 3,000 Sq Ft Homes
- Aluminum Gutters: Gauges, Finishes and Seamless Systems
- Copper Gutters: Patina, Weights, Soldering and Lookalikes
- Steel, Galvalume, Stainless and Zinc Gutters Compared
- Leaking Gutters: Finding and Fixing Seam and Hole Leaks
- How to Choose a Gutter Contractor You Can Trust
- Sagging Gutters: Why They Sag and How to Fix Them
Our process
How gutter replacement works
-
1
Repair or replace assessment
The contractor checks the metal, the joints, the slope and the fascia, and tells you whether repair is still worth it or the system has reached the end of its life.
-
2
Size the new system
Roof area, pitch and local rainfall set the gutter width and downspout count, instead of copying what failed.
-
3
Removal and haul-away
Old gutters, hangers and downspouts come off and are taken away, and the fascia behind them is inspected while it is exposed.
-
4
Fascia and drip edge
Soft boards are repaired or replaced and the drip edge is checked so the new gutter hangs on sound wood with water directed into it.
-
5
Install, test and hand over
The new system is hung, sealed and water-tested, with downspouts routed away from the foundation.
Why us
What to expect from your contractor
Honest repair-or-replace advice
If a run can be saved with new hangers and sealing, you should be told so. Replacement is quoted when the system is genuinely worn out.
The fascia gets fixed, not covered
Replacement is the best chance to repair rotten fascia. New gutters screwed into soft wood fail early.
Written scope and warranty
A written quote listing removal, materials, hangers, downspouts and any fascia work, with the workmanship warranty stated.
Related services
Often needed alongside this
Gutter Installation
New systems sized to your actual roof area — not whatever was on the house before.
Seamless Gutters
Formed on site in one continuous run — joints only at corners and downspout outlets.
Fascia & Soffit Repair
The board your gutter hangs on. If it has gone soft, nothing fastened to it will hold.
Answers
Gutter Replacement — common questions
How do I know my gutters need replacing rather than repairing?
How long do gutters last?
Should I replace my gutters and roof at the same time?
What happens to my old gutters?
Coverage
Gutter Replacement in your area
- Wichita, KS
- New Orleans, LA
- Cleveland, OH
- Tampa, FL
- St. Louis, MO
- Pittsburgh, PA
- Cincinnati, OH
- Plano, TX
- Toledo, OH
- Orlando, FL
- Durham, NC
- St. Petersburg, FL
- Louisville, KY
- Richmond, VA
- Birmingham, AL
- Des Moines, IA
- Tacoma, WA
- Arlington, VA
- Akron, OH
- Mobile, AL
- Salt Lake City, UT
- Grand Prairie, TX
- Overland Park, KS
- Fort Lauderdale, FL
- Chattanooga, TN
- Vancouver, WA
- Springfield, MO
- McKinney, TX
- Cary, NC
- Frisco, TX
- Alexandria, VA
- Joliet, IL
- Naperville, IL
- Savannah, GA
- Syracuse, NY
- Dayton, OH
Free estimate for gutter replacement
Call and describe what your gutters are doing. You will get a straight answer on what it needs and what it should cost, with no obligation.