How much does it cost to replace a fascia board?

HomeAdvisor reports fascia and soffit work at about $6 to $20 per linear foot installed, depending on material and access.

Is it worth replacing wood fascia with PVC?

If you want to avoid repainting and rot, often yes. PVC costs more at the start but needs little maintenance.

Should I replace gutters when I replace fascia?

If the gutters are old or damaged, yes. They have to come off anyway, so replacing them at the same time saves a separate removal.

How much does it cost to replace soffit and fascia together?

Doing both at once is usually cheaper than two separate jobs, since the gutters only come down once and the same crew handles both.

What is the rotted fascia board repair cost?

Short sections of rotted board are priced per foot plus a minimum charge; long runs or rotten rafter tails add carpentry time.

Pricing

Fascia and Soffit Replacement Cost

Fascia and soffit work is usually priced by the linear foot. The material you choose and how badly the wood has rotted decide most of the cost.

Updated 2026-10-26 · Gutter Fixing Editorial Team

HomeAdvisor, in its June 2026 guide, puts most fascia and soffit projects between about $1,050 and $3,300, with an average around $2,500. Small repairs can be a few hundred dollars and large replacements on bigger homes can reach about $6,000. For a one-story home with roughly 250 linear feet of roof edge, it gives an example range of $1,500 to $5,000.

Soffit and fascia repair cost per linear foot

Item	Range per linear foot (HomeAdvisor)
Fascia and soffit installation or repair	$6 to $20
Labor alone	$6 to $20
Materials alone	$1 to $20
Painting	$2.50 to $6.50
Drip edge	$1 to $2

Fascia material costs

Material	Material cost per linear foot (HomeAdvisor)
Wood or cedar	$1 to $3
Fiber cement	$1 to $5
Composite	$1 to $8
PVC or uPVC	$3 to $7
Vinyl	$5 to $9
Aluminum	$8 to $20

Wood is cheapest to buy but needs painting and rots when water gets in. PVC and composite boards cost more but do not rot. Aluminum is often used as a wrap over wood fascia rather than as the board itself.

Cost by type of damage

Water damage repair: about $10 to $23 per linear foot.
Dry rot repair: about $500 to $4,000 depending on how far it has spread.
Insect or animal damage, including nest removal: about $75 to $2,000.
Hard-to-reach areas: HomeAdvisor suggests adding roughly 7 to 15 percent.

Why fascia cost is tied to gutter cost

Gutters hang on the fascia, so the two jobs overlap. If the fascia is being replaced, the gutters must come down, and putting old or failing gutters back up wastes the opportunity. If gutters are being replaced, the fascia is exposed and any rot is found. Planning both together saves a second visit and a second removal charge.

Fascia board repair cost or full replacement?

Short rotten sections at board ends, corners and below gutter outlets can be cut out and spliced, which keeps the cost down. If soft wood shows up along much of a board, replacing the whole board is better value, because spliced repairs on a failing board will not hold new gutter hangers for long. Ask the contractor to mark the soft areas and price both options.

Replacing soffit cost

Soffit is the panel under the roof overhang. HomeAdvisor groups it with fascia in its per-foot figures. Vented soffit panels cost a little more than solid ones but are important for attic ventilation. If you are replacing soffit, make sure vents are kept clear of insulation so the attic can breathe.

Keeping fascia costs down

Fix the gutter or drip edge problem that caused the rot, or it will return.
Repair small soft spots early before they spread along the board.
Choose PVC or wrapped wood if you do not want to repaint the roof edge.
Combine fascia, soffit and gutter work into one job.

How fascia rot starts

Fascia usually rots from the back, where water runs behind a gutter that is missing a drip edge, or overflows from a clogged or sagging gutter. The paint on the front can look fine while the board behind it is soft. Ice dams in cold climates push meltwater under the shingles at the eave, and that water soaks into the top of the fascia. Fixing the cause at the same time as the board is what keeps the repair from being repeated.

Painting and finishing costs

New wood fascia needs priming and painting, which HomeAdvisor prices at about $2.50 to $6.50 per linear foot. Painting both sides and the cut ends before installation helps the board last much longer. PVC and pre-finished aluminum do not need painting, which is part of why their higher material cost can still be good value over time.

Soffit vents and attic health

When soffit is replaced, it is a good moment to check attic ventilation. Vented soffit lets cool air into the attic, which helps keep the roof deck cold in winter and reduces ice dams, and lets moisture escape. If insulation has been pushed against the soffit vents, it blocks that airflow. Ask the contractor to check that baffles are in place and that new vented panels are not blocked from inside.

Who to hire for fascia and soffit work

Fascia and soffit work is done by gutter contractors, roofers, siding companies and carpenters. A gutter contractor is a good choice when the gutters are being replaced at the same time. A roofer is better when the roof edge, drip edge and shingles also need work. A carpenter may be best for older homes with decorative trim or rotten rafter tails. Whoever you choose, ask how they will protect the roof edge and how they will dispose of the old material.

Garage and outbuilding fascia

Detached garages, sheds and porches often have thinner, unpainted or poorly flashed fascia that fails before the house. Adding them to the same job as the house is usually cheaper than a separate visit, and it is a chance to add gutters where water currently drips onto doors and paths.

Rafter tail repairs

When fascia has been wet for years, the ends of the rafters behind it can rot too. Repairing rafter tails means sistering new wood alongside the damaged ends or replacing them, which adds carpentry time and cost. A contractor will only find this once the fascia is off, so ask how it will be priced if it comes up.

Getting comparable fascia quotes

Ask each contractor for the length of fascia and soffit included, the material and finish, whether painting is included, and their per-foot rate for any extra rotten wood found. Without the same basis, two quotes cannot be compared fairly.

Fascia wraps and capping

Aluminum fascia capping is bent on site to cover sound wood boards, so they never need painting again. It costs more than paint but less than replacing the board with PVC. It should only go over dry, solid wood, because covering soft fascia hides rot that keeps spreading underneath. Ask the contractor to probe the boards before quoting a wrap.

Sources

HomeAdvisor, fascia and soffit repair cost (Jun 2026)